Hydroman® 2000m3/h Slurry Submersible Pump with Side Cutters and Jet Ring can be also called large capacity submersible slurry pump. This submersible slurry pump can operate up to 2000m3/h pumping working, and with the help of side cutters and jet ring to lift settle solids, submersiblle slurry pump can pump thickness, hard and sticky sand, mud, clay, silt, sludge, sewage etc. from rivers, lakes and seas. So the large capacity 2000m3/h submersible dredging sand pump is the decent submersible pumps for river dredging, river port construction and marine construction.
Submersible slurry mud pump is an important equipment for extracting water from deep wells that the whole unit is submerged into the water to work, install auxiliary measures such as fixed brackets, extracting groundwater to the surface, which is used for domestic water, mining rescue, industrial cooling, farmland irrigation, seawater lifting, ship transfer, and also for fountain landscape. Other suitable applications of submersible sludge pump include: Lime slurries Mill scale Coal runoff sumps Wash down sumps Ash transfer Tailings ponds Slag pits Food wastes Silt removal Quarry sand & gravel de-watering Barge & tank clean out Bentonite.
Advantages of Submersible Slurry and Sludge Removal Pumps:
The submersible underwater sand suction pump offers several major advantages over other types of slurry pumps:
Cavitation: Because submersible sand pumps are fully submerged, so submersible sludge pumps are not prone to cavitation. This can be a problem with centrifugal pumps and other types of positive displacement pumps.
Efficiency: When a centrifual pump is submerged there is positive fluid pressure at the inlet of the pump. This condition can increase efficiency due to less energy required to move fluid through the liquid path of the pump.
Noise: Being submerged, these submersible dredging pumps are very quiet in most applications.
Flexible installation, submersible slurry pump with side cutters is no need to install auxiliary measures such as fixed brackets during operation;
There is no substitute for the scope of application of the submersible slurry pump. Generally, the maximum working depth of the vertical slurry pump is 1.8 meters (up to 9 meters after our continuous research, but the operation is unreliable). The operation of the slurry pump will be unreliable to a certain extent, and the failure rate will increase significantly, but according to the current sealing technology, the maximum working depth of the submersible slurry pump is 25 meters under the liquid;
Hydroman® 2000m3/h Slurry Submersible Pump with Side Cutters and Jet Ring Usage:
• Mining & quarrying: cleaning main drainage basins of settled solids, slurry tailings removal/reprocessing
• Industrial: transporting abrasive run-off from storage, cleaning conveyor areas, draining overflow sumps as well as pulp and paper tanks
• Municipal: removal of sediment from grit chambers/sand traps
• Coal washing water
• Sump cleaning and cleaning of settling ponds
• Dredging on Barge for Offloading and Unloading
• Coal and ore slurries
• Grit removal in sewage treatments plants
• Cooling water/mill scale pumping in iron/steel production
• Bentonite pumping
• Various drainage applications in quarries and mines
Hydroman® 2000m3/h Slurry Submersible Pump with Side Cutters and Jet Ring Photos: